Pressed steel wire rope rigging is made from steel wire rope as raw material and processed by a steel wire rope pressing machine. It has the characteristics of high strength, light weight, and is not easy to suddenly break the entire piece. It is widely used in industrial construction fields such as steel, transportation, ports, etc.

Precautions for the Use of Pressed Steel Wire Rope Rigging

1. Before using the press steel wire rope rigging, perform a lifting heavy object experiment first.

2. When using the pressed steel wire rope rigging, it is necessary to first check if there are any broken wires in the steel wire rope rigging.

3. Galvanized steel wire rope can be used as the raw material for pressed steel wire rope rigging in damp or outdoor environments to enhance rust resistance.

4. In addition to the wear and tear of the outer layer of the steel wire rope, the pressed steel wire rope rigging mainly breaks due to metal fatigue caused by repeatedly bending around the hook and the object being lifted. Therefore, the ratio of the diameter of the hook or object being lifted to the pressed steel wire rope is an important factor determining the service life of the pressed steel wire rope rigging.

5. Pressed steel wire rope rigging is mainly used in transportation that requires high-strength wire ropes such as lifting and pulling. During use, it is strictly prohibited to stand under or pass through the lifted object.